Went in well. I used a steamer to get in the tight spots. Also put in the seat before the backs.
Why choose us?
At Kustom Interior™, every product narrates a tale of supreme craftsmanship. Our commitment to quality is unwavering, as we handpick only the finest materials to craft our products.
You may also like
FAQs
Premium Artificial Leather is a high-quality synthetic material designed to look and feel like real leather, offering consistency, easy maintenance, and affordability, while Genuine Leather is made from natural animal hides, valued for its authentic texture and aging character but requiring more care and coming at a higher cost.
No, our seat covers are designed to slide over your existing seats, so there’s no need to remove the original leather or upholstery.
No, our seat covers are specially designed with breathable materials and precision fit to ensure that your heated and ventilated seat functions work properly. The design allows air and heat to pass through without compromising comfort or performance.
Yes, we offer a range of color options and custom finishes. You can explore our Custom Collection on our website or contact us at customorder@kustominterior.com for special requests.
Each seat cover package includes the seat covers, small installation tools for easy setup, and a branded decal with our logo.
Customer Reviews
Overall rating: 4.8 / 5 from 22 reviews.
I installed the seat covers in my ‘17 Mustang GT convertible today in about 5 hours, the bulk of which was removing and reinstalling the front seats. I am impressed with the quality and fit of the covers and really like the way the white stitching looks with the stitching on door panels.
Easy to install and look awesome
Looks awesome. Excellent fit. I’ve shown them on a few Mustang groups and got tons of comments and people asking where I got them. I’ve been giving out your website info the last few days. Thanks for this great product it completely changed the look of the car
Seats fit perfect and feel good , easy to install.
Great product, perfect fit. Love it”
The figment was really good. I was pleased on how great it stuck to my original seats. I installed whole seats were still intact. Most people take seats out for easy install, but it wasn’t hard to install while original seats were still intact. The only thing I would say is that my back seats have some air still in them to where it looks bulged but I believe if I had people sitting in my back seats they would conform better and wouldn’t look a little bulged. But other than that everything looks great. Would definitely recommend buying.
I installed the front covers without removing the front seats. For my 2016 Mustang convertible, put the top down. I started with the rear seats. I did remove the rear seats. It was easy. Bottom section just has two latches to push in underneath each seats front edge, and lift up and out. The Back section of the convertible doesn't fold down, so it needs removed. Two 15mm bolts hold it, one on each side at the bottom. Slide (pound) upwards to disengage the hooks from the square holes Fitted the proper covers to each section (2 total for rear). The bungee hooks and velcro are very well placed for max snugness underneath and back of the pieces. Then reinstall back first with two bolts at bottom after making sure the upper hooks are in the square holes. This took some teamwork from my son. Very tight fit and rear is done. The Front Seats I started with the bottom of both driver and passenger. Place them as they go, and then push 3 bungee oval flats into the gap between top and bottom until they are all the way through and flip sideways securing them tight. I used my fingers on the bottoms the tops were a different story. To finish the bottoms, hook bungee hooks to anything secure under the bottom front edge. Now on to the Tops. Remove both headrests. Wrestling these covers into place took abit of teamwork. Make sure zippers face middle console. The belt loop hooks, rear latch, and headrest holes are all clearly in the right place. Then zip with help. Slide any material under the plastics edges of these items. Make it look as original as possible. I was able to fit it under everything with a flat tool. I used a dash tool and a flat head along with my fingers. Now comes the really hard part. Those ovals... 3 each on each piece. Remember where you put the bottom ones? Now place these top ones in nearly the same place, but now everything is ten time tighter now. Nearly broke my fingers before I tried the needle nose pliers and a large flathead screwdriver. It finally worked when I placed them to the side of the bottom ovals that were already there blocking my bad attempts. After that fiasco, just take a picture on your cell, under the back of both of the front seats ant locate something to hook the bungee hooks to. You are not going to be able to see so just feel your way to hook them. Last thing is headrests. Put them back into their base to hold firmly. Pull down equally on both sides and line up all edges and hanger hooks and snug them in. Again the material will fit behind plastics. Then replace everything to its proper location. I'm done. I didn't need to disconnect the battery, or remove the front seats at all.
As the title says, I installed the front seat covers without removing the seats. For my 2016 Mustang convertible, put the top down. I started with the rear seats. I did remove the rear seats. It was easy. Bottom section just has two latches to push in underneath each seats front edge, and lift up and out. The Back section of the convertible doesn't fold down, so it needs removed. Two 15mm bolts hold it, one on each side at the bottom. Slide (pound) upwards to disengage the hooks from the square holes Fitted the proper covers to each section (2 total for rear). The bungee hooks and velcro are very well placed for max snugness underneath and back of the pieces. Then reinstall back first with two bolts at bottom after making sure the upper hooks are in the square holes. This took some teamwork from my son. Very tight fit and rear is done. The Front Seats I started with the bottom of both driver and passenger. Place them as they go, and then push 3 bungee oval flats into the gap between top and bottom until they are all the way through and flip sideways securing them tight. I used my fingers on the bottoms the tops were a different story. To finish the bottoms, hook bungee hooks to anything secure under the bottom front edge. Now on to the Tops. Remove both headrests. Wrestling these covers into place took abit of teamwork. Make sure zippers face middle console. The belt loop hooks, rear latch, and headrest holes are all clearly in the right place. Then zip with help. Slide any material under the plastics edges of these items. Make it look as original as possible. I was able to fit it under everything with a flat tool. I used a dash tool and a flat head along with my fingers. Now comes the really hard part. Those ovals... 3 each on each piece. Remember where you put the bottom ones? Now place these top ones in nearly the same place, but now everything is ten time tighter now. Nearly broke my fingers before I tried the needle nose pliers and a large flathead screwdriver. It finally worked when I placed them to the side of the bottom ovals that were already there blocking my bad attempts. After that fiasco, just take a picture on your cell, under the back of both of the front seats ant locate something to hook the bungee hooks to. You are not going to be able to see so just feel your way to hook them. Last thing is headrests. Put them back into their base to hold firmly. Pull down equally on both sides and line up all edges and hanger hooks and snug them in. Again the material will fit behind plastics. Then replace everything to its proper location. I'm done. I didn't need to disconnect the battery, or remove the front seats at all.
Total transformation, looks and fits great. Can't tell they are covers. They look like factory upholstery! Don't even hesitate, if you are looking for a high quality seat cover that looks factory, this is the place!
Fit like a glove
Dramatic improvements to the interior of my mustang. Install was not difficult. T55 torq socket required to remove front seats. The back was clips. All in ~1-1.5 hours install time. Have your vacuum handy since your gonna have access to areas can't normally get to as well! Looks factory sits comfortably. 10/10
Love the seats covers. They look great and I get a lot of compliments on them.
Fit amazing it was easy to instal
Beautiful and easy to install. I’ve had so many compliments. Very soft and comfortable.
The seats quality were great but there were area where the seat didn’t cover that had me far disappointed and dissatisfied.
Looks and fits amazing
10/10 quality! If you’re in between the artificial leather and authentic leather the artificial leather looks and feels amazing! The artificial leather is better than the factory leather in my opinion.
Great customer support system
Seats a great!!
The seats was nice...but one of the head rest stitching was off
Didn’t get to order made me leave review b4 I ordered
